MRC N 1808 Drop-In Kato EMD SD80 and SD90/43MAC Sound Decoder

MRC is excited to release another breakthrough in N scale sound the 1808 Diesel Sound Decoder for Kato's SD80 and SD90/43MAC locomotives.

Taking miniaturization and MRC's industry leading technology to the limit, this DCC/DC sound decoder is 100% drop-in! The most simple, straight-forward, n scale installation imaginable.

Remove the loco body, lift out the factory circuit board and replace with the MRC sound decoder/speaker combo, put the body back on. No wiring needed.

The decoder is equipped with MRC's world renowned Brilliance sound, miniaturized to a single drop-in decoder with included speaker, that's virtually "plug 'n play". MRC's true, live capture, full fidelity sound including diesel rumbles, actually recorded (rail side) by MRC's Sound Engineers from real diesel locomotive prime movers.
Four Types Of Synchronized Diesel Prime Mover Sounds To Choose From0.75 Amp Capacity
33 Different Types Of Horns and 8 Types Of Bells
Programmable Individual Sounds Volumes, Either 2 Digit Or 4 Digit Addresses, Start Voltage and Top Voltage, Acceleration and Deceleration Rates, and 14, 28, 128 Speed Steps
Supports Full Read Back Of CV's, Advanced Consisting (CV19), and Programming On The Main (OPS Mode)
Selectables Factory Default Speed Curve
Advanced Speed Table Control CV67-CV94
Kick Start Voltage Control CV65
3 Headlight Effects, Which Are Directional, Rule 17, Off Dim Bright Cycle
28 Accessory Functions (F1-F28)
Compatible With NMRA DCC Standards
Complies With Part 15 Of FCC Regulations
10mm, 32 OHM Speaker Included
PCB Size 82 x 9.7 x 6.2 mm
Directly Replaces Kate EMD SD80 Circuit Board