Osborn Model Kits HO 1067 Grain Elevator Kit

The grain elevator kit is based on the Canadian Pacific 60,000 bushels elevator, these were seen all over the prairies in the early part of the 1900s.

Laser Cut Wood Kit
Footprint Requires A 12" x 12" Area
Tools Required Area A Sharp Hobby Knife, C.A. Or White Glue, Paint Brushes, Masking Tape, and Clamps

Includes:
2 Inner Annex Frame
2 Outer Annex Frame
12 Annex Cross Braces
4 Upper Annex Cross Braces
2 Receiving Inner Frame
2 Receiving Outer Frame
2 Upper Annex Roof Support
1 Upper Annex Support Brace
2 Motor House Frame
1 Rear Wall
1 Rear Wall Bottom
1 Front Wall
2 Side Walls
2 Upper Side Walls
1 Receiving Front Wall
2 Receiving Side Walls
2 Upper Annex Roof
2 Lower Annex Roof
4 Upper Annex Fascia
4 Lower Annex Fascia
2 Receiving Roof
2 Side Receiving Fascia
1 Front Receiving Fascia
2 Receiving Doors
2 Receiving Door Channel
6 Annex and Receiving Windows
2 Lower Receiving Windows
2 Motor House Windows
1 Lower Receiving Door
1 Receiving Entrance Door
2 Motor House Doors
2 Motor House Side Walls
2 Motor House End Walls
2 Motor House Roof
2 Motor House End Fascia
2 Motor House Side Fascia
4 Receiving Lamp Legs
2 Receiving Deck
1 Walk Way Legs L/R Sides
1 Walk Way Deck Long
1 Walk WAy Deck Short
1 Back Railing
4 Stair Sides
4 Stair Deck
Set Of Glass
1 Discharge Spout
Instructions